From the selection of new, used, and rebuilt parts from different manufacturers, choose the suitable hydraulic Solenoid pump to get your construction equipment up and running in no time. At competitive prices, you can maintain, modify, enhance or replace your machines and vehicles. The valves are available with interchangeable DC or AC solenoids.Get wholesale hydraulic solenoid valve from global wholesalers, Alibaba. These valves have a high transmittance of hydraulic pressure up to 350 bar and an optimized design to minimize pressure drop. The valves are operated by either one or two electronic coils, depending on the operational type (4/2- or 4/3-way). These valves have 4 ports and can be 2 or 3 positions and conform to DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03 mounting patterns. The Bosch Rexroth WE6 series hydraulic solenoid valves are used to electrically direct hydraulic fluid to and from a pump/actuator. Requires a continuous electrical current to maintain position.The valves are available with interchangeable DC or AC solenoids.Suitable for high pressures up to 350 bar.Good protection against the environment thanks to the IP65 rating.

It is equipped with a robust manual override for easy comissioning and in case of a power outage.Since the valve has a maximum operational pressure of 350 bar (5075 psi), it can be used for high pressure applications. The manual override can be operated up to 5-10 bar. Manual override feature can be used to operate the system during power failure.

The NBR (nitrile rubber) sealing is suited for mineral oils. The valve has a flow rate of 60 l/min and a maximum allowable viscosity of 400 cSt. The valve is suitable for systems with a max pressure of 350 bar (5075 Psi) and a operating temperature range of -15 - 80 ° C (5 - 176 ° F). In the initial position the flow flows from P to A and from B to T. The valve has a cast iron housing with NBR (nitrile rubber) sealing. Bosch Rexroth direct operating 4/2 way hydraulic solenoid vave with NG6 (D03) mounting interface (the mounting interface NG 6 is standardised according to DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03) and a 230 V AC coil.

Hydraulic electric solenoid valve